DIY Faucet Repair: A Step-by-Step Guide to Fixing Common Problems

26 April 2024
 Categories: , Blog

Share  

Faucets are an essential part of your everyday life. From washing hands to doing dishes, you rely on them for water supply in your home. However, just like any other appliance, faucets can also face wear and tear over time and may require repair.

Dripping Faucets

One of the most common faucet problems is a dripping faucet. It can waste a significant amount of water if left unfixed. The most common source of a dripping faucet is a worn-out rubber washer. To fix this issue, you will need to turn off the water supply to the faucet and disassemble the handle. Replace the rubber washer with a new one and reassemble the handle. This should stop the dripping.

Low Water Pressure

If you notice a reduction in water pressure, it could be a result of mineral build-up in your faucet aerator. The aerator is a small screen at the end of your faucet that controls the water flow and helps to conserve water. To clean the aerator, unscrew it from the faucet and soak it in vinegar for a few hours. Rinse it thoroughly with water and screw it back onto the faucet. This should improve your water pressure.

Leaky Base

A leaky base is another common issue that can be easily fixed at home. The base of the faucet is where it connects to the sink or countertop. Over time, the sealant around this area can wear out and cause leaks. To fix this, you will need to turn off the water supply and unscrew the base of the faucet from the sink. Clean off any old sealant and apply a new layer before screwing it back on.

Screeching or Whistling Noise

If your faucet makes a screeching or whistling noise when you turn it on, it could be due to a loose or worn-out washer. To fix this, you will need to disassemble the handle and tighten any loose parts. If the washer is worn out, replace it with a new one.

Faucet problems can be frustrating, but with a little knowledge and some basic tools, most issues can be easily fixed at home. Remember to always turn off the water supply before attempting any repairs, and if you are unsure, it is best to consult a professional. Regular maintenance and timely repairs can help extend the lifespan of your faucet and save you from costly replacements in the future.

Learn more from a company near you like Tonka Plumbing Heating & Cooling Inc.